Contact us For registered customers Lietuvių По-русски
BASEC DNVGL

APPV

Choose specification
Number of cores:
Choose cross-sectional area, mm²:

APPV

The wire is designed for fixed installation, to lay beneath the plaster or in waterproof cable ducts.

Solid conductor is made out of annealed aluminum wires. Aluminum conductor are PVC-insulated.

Additional information

The wire fully complies with the EU Directive 2011/65/ES on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment.

The wire fully conforms to the requirements of the EU Directive 2006/95/EB for Low Voltage.

The cable conformed with Regulation (EU) No 305/2011 of the European Parliament and of the Council.

Reaction to Fire Class Eca. DoP (Declaration of Performance LK-DoP 10/001/EN)

Technical date
Conductor resistance at +20°C In accordance with GOST 22483-77
Conductor working temeprature, max. +70°C (under normal conditions) 160°C (in the event of short circuit)
Thermal shock 1 h at +150°C
Rated voltage U/U0 450/750 V
High voltage test, kV 2,5 kV
Operating temperatures Mounting -5°C - +40°C Operating -30°C - +70°C
Flame propagation Flame test in accordance with LST EN 60332-1-2
Construction
Conductors Solid, annealed aluminum, class 1 in accordance with GOST 22483-77
Insuliation PVC insulation compound type TI 1 in accordance with LST EN 50363-3
Cable colours Cores color in accordance with LST HD 308, green/yellow in accordance with LST EN 50396

See also


RPV

The cable is designed for telephone distribution networks where frequency is up to 10 kHz.…


H05VV-F

The cable is designed for medium power domestic appliance installation in domestic premises (washing-machines, refrigerators…

© 1958 - 2021 AB „Lietkabelis“. All rights reserved. Created by A-GAIN