Contact us For registered customers Lietuvių По-русски

IS 201-4 flat

Choose specification
Number of cores:
Choose cross-sectional area, mm²:

IS 201-4 flat

The cable is designed for electricity supply, lightning, and electrical installations.

Soft conductor is made out of annealed copper wire, so the cable is easy to use.

ForIrelandmarket only.

Additional information

The cable fully complies with the EU Directive 2002/95/EC on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment.

The cable fully conforms to the requirements of the EU Directive 73/23/EEC for Low Voltage.

Technical date
Conductor resistance at +20°C In accordance with IS 201-4
Conductor working temeprature, max. +70°C (under normal conditions) + 160°C (in the event of short circuit)
Thermal shock 1 h at +150°C
Rated voltage U/U0 300/500 V
High voltage test, kV 2 kV
Minimum bending radius > 5 times the cable diameter
Operating temperatures Mounting -5°C - +40°C Operating -30°C - +70°C
Flame propagation Flame test in accordance with LST EN 60332-1-2
Conductors Solid (1-2,5 mm2), class 1 Stranded (4-16 mm2), class 2 in accordance with IS 201-4
Insuliation In accordance with IS 201-4
Core colours Cores colours in accordance with IS 201-4
Sheath PVC insulation compound type 6 in accordance with BS 7655-4.2
Sheath colour In accordance with IS 201-4
Grounding core Solid (1-2,5 mm2), class 1 Stranded (4-16 mm2), class 2 in accordance with BS 6004

See also


The wire is designed for fixed installation, to lay beneath the plaster or in waterproof…


The cord-cable is designed to use in devices where voltage does not exceed 100 V.…

© 1958 - 2021 AB „Lietkabelis“. All rights reserved. Created by A-GAIN